Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Century City, CA
Garage door installation in Century City means working with towers, not tract homes. The 90067 ZIP is a vertical business district built on the former 20th Century Fox backlot, so the doors we install here serve parking structures beneath Avenue of the Stars, loading docks behind Constellation Boulevard office towers, and the commercial bays feeding Westfield Century City. Coastal humidity from Santa Monica Bay corrodes aging steel hardware, while building security rules mean every job runs on a badged, coordinated schedule. Stonewall Garage Door Repair has served Century City since 2013. Call (855) 740-8388 for a free estimate on any installation, repair, or opener job.
Why Century City Homes Are Different
Century City is not a suburb with rows of two-car garages. The building stock is 1960s through 1980s office towers, mixed-use high-rises, and two major shopping centers, all built when steel roll-up doors and chain-driven sectional operators were the standard. Those doors are now 40 to 60 years old. The salt-tinged marine layer that rolls in from Santa Monica Bay keeps humidity high near the coast, which accelerates rust on tracks, hinges, and spring hardware. Santa Ana wind events blow ash and grit into loading docks, grinding against rollers and cables. Fire-rated roll-up doors in the parking structures must stay code-compliant for LAFD inspections, and building management often requires proof of insurance before anyone touches a dock door. We handle that paperwork before we arrive.
What this means for anyone managing a Century City property: the door that worked fine in 1985 has spent four decades in salt air and daily cycles. Components fail on timetables, not convenience. Our technicians know which doors in this district were installed in which era, because we have been servicing them since 2013. When a loading dock door jams at 6 a.m. before a delivery window, that is a Century City problem with a Century City solution.
Styles & brands we work with
Our Main Century City Services
Two jobs dominate the calls we get from Century City building managers and the condominium owners who live in the residential towers off Avenue of the Stars: broken doors and dead openers. Here is what each one involves here.
Garage Door Repair in Century City
Most repair calls in Century City come from loading docks, trash rooms, and subterranean parking levels. A snapped spring or seized roller on a commercial sectional door stops deliveries, blocks tenant access, and creates a security gap in a building that runs on controlled access. The coastal air here means we see more corrosion-related failures than inland: rusted cables, pitted tracks, and springs that snapped because metal fatigue finally won. We diagnose the specific failure, replace only what failed with parts matched to the door’s brand and cycle rating, and confirm the door balances before we leave. Garage Door Repair in Century City is the one call that handles it.
Garage Door Opener Repair in Century City
Century City parking garages and loading bays run openers hard, sometimes hundreds of cycles a day during delivery peaks. When an operator fails, it is rarely the motor; it is a stripped gear, a dead logic board, a misaligned photo eye, or a chain that has stretched past adjustment. We work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor openers, which covers the majority of what is still running in 90067. We test the safety reversal and force settings after every repair, because a parking structure door that does not reverse on obstruction is a liability no building wants. Garage Door Opener Repair in Century City gets the operator back online without swapping parts that do not need swapping.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Century City
Garage door installation in Century City is almost always a commercial or mixed-use job. The original steel roll-up doors and sectional operators installed in the 1960s through 1980s have reached end-of-life, and building owners are replacing them with code-compliant fire-rated doors, higher-cycle openers, and weather-sealed loading bay systems. Salt air corrosion, delivery-window pressure, and LAFD inspection requirements all shape what we recommend. Our installation team handles the full job: measure, spec, coordinate with building management, remove the old door, install the new one, and dispose of the debris. This is the full-service Garage Door Installation work we do for properties throughout 90067.
Garage Door Replacement
Signs you need it
The door has rusted through at the bottom panels, the tracks are warped beyond realignment, or the door has been hit by a delivery truck one too many times and no longer seals or balances.
What it costs in Century City
A new door installation in Century City typically runs $700 – $2,200 depending on size, fire rating, insulation, and whether it is a sectional or roll-up configuration.
How we do it
We measure the opening, confirm the fire-rating requirements with building management, order the specified door, remove and haul away the old one, install the new door and hardware, and test full travel and safety systems.
Commercial Garage Door Installation
Signs you need it
Loading dock doors that stick mid-travel, fail fire inspections, or have been patched so many times they cannot maintain a pest or weather seal are due for replacement.
What it costs in Century City
Commercial installation jobs fall in the $700 – $2,200 range, with fire-rated roll-ups and high-cycle sectional doors at the upper end of that bracket.
How we do it
We coordinate access with building security, schedule around delivery windows, install the door and opener, and run it through the full LAFD-facing safety check before we sign off.
Garage Door Seal Installation
Signs you need it
Daylight visible under the door, water pooling inside after rain, or pest activity around the dock or trash room means the bottom seal or weatherstripping has failed.
What it costs in Century City
Seal installation is part of the $700 – $2,200 new door range when included with a full install, and we always replace seals as part of any door replacement.
How we do it
We remove the degraded seal, clean the channel, install a new vinyl or rubber seal cut to the exact door width, and test the compression against the floor for a full contact line.
What Garage Door Installation Costs in Century City
| Item | Typical range in Century City |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Do you handle the permits for garage door work in Century City?
Most single-door replacements in existing openings in Century City do not require a separate permit, but fire-rated doors in commercial structures do require code compliance documentation. We confirm requirements with building management before the job starts, so you pay exactly what was quoted and approved.
Can you install a new door after hours in Century City?
Yes, we schedule after-hours and weekend installations for loading docks and parking garages in Century City where closing a bay during business hours would disrupt deliveries. We coordinate the schedule with building security before confirming the install date. Call (855) 740-8388 to plan one out.
Brands We Service in Century City
We carry working parts for the brands already installed across Century City, and we are factory-familiar with all eight major door and opener lines we service. Chances are the door on your property is one we know well; if we do not have a specific part on the truck, our local supplier network gets it into 90067 fast. Our scope covers Amarr, Wayne Dalton, Craftsman, Raynor, plus LiftMaster, Chamberlain, Genie, and Clopay. We work on the brand already on your garage, not just the ones we prefer to sell. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Century City, CA
| Service | Typical range in Century City |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a Century City price up is access coordination and fire-code requirements. A loading dock door that has to be replaced on a Sunday night costs more to schedule than a standard residential swap, and a fire-rated roll-up door costs more than a non-rated sectional. Whatever the job, the price is quoted and agreed before any work starts. You will never see an invoice that does not match the number you approved.
Neighborhoods We Serve in Century City
We work throughout the 90067 ZIP and the commercial blocks that border it, from the office towers along Avenue of the Stars to the loading docks serving the Century City Shopping Center and the residential towers near Constellation Boulevard. Our response time for most Century City repair calls is same-day when the parts are on the truck and next-day for specialty orders.
- Avenue of the Stars corridor
- Constellation Boulevard office district
- Century Park East and West
- Westfield Century City loading zones
- Santa Monica Boulevard frontage
Service Area – Cities Near Century City
Stonewall Garage Door Repair also handles service calls in the communities directly around Century City. If your property is in Beverly Hills, CA, over in Culver City, CA, up in West Hollywood, CA, or south in Ladera Heights, CA, we can get a technician to you on the same schedule we run for 90067. One call covers the whole Westside corridor.
Serving Century City, CA — Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Century City
For most repair jobs in Century City we can dispatch same-day. Loading dock and parking structure work sometimes needs building security clearance before we can access the door, so call us first thing if you have a morning delivery window. We work with the building’s protocol, not against it.
Yes. We carry insurance documentation, we sign in with building security, and we schedule work around loading dock delivery bans and rush-hour restrictions. Fire-rated door work stays code-compliant because we do this work in Century City regularly and know what inspectors look for.
We are licensed and insured, and commercial sectional and roll-up doors are a core part of what we do in 90067. Our technicians handle fire-rated doors, high-cycle openers, and loading dock systems in office towers and shopping centers across Century City. Call (855) 740-8388 for a free estimate on any commercial or residential door.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Century City Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Maria Salazar"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Rachel Hayes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Danielle Fletcher