Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Garage door installation in Burbank usually means working around a house built before 1960, and that changes the whole job. The city’s streets are lined with mid-century ranches whose original tilt-up wood doors are warping, cracking, or seizing in the dry heat, and a new door often needs header and track modifications to fit a shallow 1950s garage. We handle that every week. Stonewall Garage Door Repair has served Burbank since 2013, and we install, repair, and service garage doors and openers across all four Burbank ZIP codes: 91505, 91506, 91507, and 91508. Call (855) 740-8388 when you need a straight answer about your door.
Why Burbank Homes Are Different
Burbank is not a new-tract city. Most single-family homes went up between the 1940s and the late 1950s, and thousands of them still carry the original one-piece tilt-up wood door that swings out over the driveway. In the Rancho district especially, those doors hang on cast-iron hinges that have spent seventy summers baking in triple-digit heat. The hinges seize, the wood warps, and the door binds against the frame. When that happens, off-the-shelf parts won’t help. The original hardware is no longer stocked by local suppliers, so we custom-order what we need and machine adjustments on site.
There’s also the seismic code. California requires garage door openers to be anchored and braced to earthquake standards, and Burbank inspectors enforce it. Every opener we install or service in Burbank gets checked for proper header anchoring and rail bracing, because a minor quake will misalign an unbraced rail and leave the door dead halfway up. Add the hot, dry summers that rust steel tracks and crack wood panels, and you have a repair market where knowing what’s original to the house matters more than knowing what’s cheapest.
Styles & brands we work with
Our Main Burbank Services
Most Burbank calls start with one of two problems: a door that won’t move, or an opener that won’t respond. Here’s what each job involves here.
Garage Door Repair in Burbank
Most repair calls in Burbank trace back to original hardware on a pre-1960 home. Springs snap from years of heat cycling, cables fray inside old tracks, and wood panels crack and pull away from their hinges. We work on the door already attached to your garage, including original tilt-up doors in Magnolia Park and the Rancho district. The fix usually starts with a spring or cable replacement, then a realignment pass so the door doesn’t bind. For the full breakdown of what repair costs and how we handle same-day calls, see Garage Door Repair in Burbank.
Garage Door Opener Repair in Burbank
Openers in Burbank fail in predictable ways: stripped drive gears, burned-out logic boards, sensors knocked out of alignment by a door that’s been slamming for years, and rails that shake loose on older ceilings. The seismic bracing requirement means a loose opener isn’t just noisy; it’s a safety code issue waiting to sag further. We repair LiftMaster, Chamberlain, Genie, and Craftsman units, including the myQ and Aladdin Connect smart systems. For details on what we test and what it costs, see Garage Door Opener Repair in Burbank.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Installing a new garage door in Burbank is rarely a like-for-like swap. Most of the houses we work on predate the modern standard 7-foot door height, and the garage headers are often shallower than what today’s insulated doors expect. That means our installation work in Burbank frequently includes reframing or reinforcing the header, building new track mounts, and sometimes converting an old tilt-up opening to a sectional track. It’s measured work, done right, with a written price agreed before we order anything. For a complete overview of our installation process, see Garage Door Installation.
Garage Door Replacement
Signs you need it
You need a replacement when the door’s frame is too far gone to repair, the wood has rotted through at the bottom rail, or the panels are cracked and pulling away from the hinges.
What it costs in Burbank
New door installation in Burbank runs $700 – $2200, with the final number depending on door size, insulation, and whether the old tilt-up opening needs header work.
How we do it
We measure the opening, check the header and side clearance, order the door to fit, then remove the old unit and install the new one with new track, springs, and hardware.
Garage Door Installation Service
Signs you need it
You’re adding a garage to an ADU conversion, replacing a damaged door on an older home, or your current door is binding so badly that repair is no longer cost-effective.
What it costs in Burbank
A full installation service, including the door, tracks, springs, and labor, lands between $700 and $2200 in Burbank.
How we do it
We handle the full job: removal, header inspection, new door mounting, track and spring installation, opener integration, and a safety test before we leave.
Garage Door Seal Installation
Signs you need it
The rubber bottom seal is cracked, flattened, or letting dust and heat into the garage.
What it costs in Burbank
Seal installation falls under our general garage door repair pricing of $150 – $600 in Burbank, and most seal swaps are at the lower end of that range.
How we do it
We pull the old seal, clean the channel, cut the new seal to length, and slide it into place so it sits flush against the floor.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| New door installation | $700 – $2200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
How long does garage door installation take in Burbank?
Most standard installations finish in one day. If your Burbank garage needs header reinforcement or a tilt-up-to-sectional conversion, plan for a second visit. We confirm the timeline before any work starts.
Can you install a sectional door where an old tilt-up door used to be?
Yes. We do this regularly in the Rancho district and Magnolia Park. The job requires reworking the header clearance and installing new side tracks, and we quote that work upfront. Call (855) 740-8388 for a free measure.
Brands We Service in Burbank
We work on the brand already on your garage. That includes LiftMaster and Chamberlain openers, Craftsman units on older homes, and Raynor doors on some of Burbank’s newer infill builds. We stock common parts for all of them, and for anything we don’t carry, our local supplier runs get us moving within a day or two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
What pushes Burbank prices up is the age of the house. Header work on a 1950s garage, custom-ordered hardware for a tilt-up door, or extra bracing to meet seismic code will add to the base number. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Burbank
We cover all of Burbank, including the neighborhoods where garage work gets the most complicated.
- Magnolia Park
- Rancho district
- Burbank Hills
- Chandler Park area
- North Burbank
For most repair calls, we can have a technician at your door the same day. Installation and replacement work is scheduled by appointment with a free measure.
Service Area – Cities Near Burbank
If you’re just over the Burbank line, we likely cover your street too. We regularly run calls into Glendale, CA, North Hollywood, CA, and Universal City, CA, and we serve Studio City, CA for both repair and full installation work.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
We cover all four Burbank ZIP codes: 91505, 91506, 91507, and 91508. That includes the hillside streets where driveway access is tight and the flatland residential blocks in Magnolia Park and the Rancho district.
For most like-for-like replacements, no permit is required. If the work involves structural changes to the header or a full conversion from tilt-up to sectional, Burbank’s building department may require a permit, and we’ll tell you before we start.
For spring, cable, or opener failures, we typically offer same-day repair visits across Burbank. Installation and full replacement jobs are scheduled in advance. Call (855) 740-8388 and we’ll give you an honest window.
Garage doors in Burbank are older, thinner, and more cantankerous than most. When yours stops cooperating, call Stonewall Garage Door Repair at (855) 740-8388. Free estimates, straight answers, and work that’s built to hold.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Rachel Hayes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Danielle Fletcher"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Jeff Novak