Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Commerce, CA
Garage door installation in Commerce means working with homes built mostly between the 1950s and 1970s, where original single-car doors are narrower than today’s standard sizes and the heat does real work on aging hardware. We handle the full lifecycle here: repairing springs and cables on original doors, replacing panels and tracks, installing modern openers, and swapping out tired doors for new ones sized to the actual opening. Call (855) 740-8388 when your door stops cooperating, and we’ll tell you straight what you’re looking at.
Why Commerce Homes Are Different
Commerce splits into two worlds that share the same garage door company. The residential streets hold mid-century tract homes with original single-car garages, many still running torsion spring systems installed when Eisenhower was president. Those springs, cables, and wood or early steel doors are now decades past their intended service life. At the same time, the industrial corridors along Washington Boulevard and the surrounding warehouse blocks are lined with high-cycle metal roll-up doors that run constantly under commercial use. A technician who only knows residential springs will get lost fast on a roll-up that cycles forty times a day.
Climate adds another layer. The hot, dry Commerce summers expand metal tracks and panels, which accelerates spring fatigue and throws off alignment on doors that were marginal to begin with. When Santa Ana winds push through, lighter doors and their anchor points take a beating. But the detail that trips up most out-of-town installers is sizing: many original 1950s openings are built to older dimensions, so an off-the-shelf door from a big-box store will not fit without modification. That is exactly the kind of job we see routinely, and it is why we measure before we order, every time.
Styles & brands we work with
Our Main Commerce Services
Most calls from Commerce homeowners start with two problems: a door that will not open, or an opener that runs but will not lift. Both live under our roof, and both are covered by the same specialized team.
Garage Door Repair in Commerce
When a spring snaps on a Commerce home, you will usually hear it before you see it. The repair means assessing whether the door itself is worth saving, and on 1950s-era installations, that is not always obvious. Old tracks, rusted cables, and worn rollers often compound a single failure. We diagnose the whole assembly, not just the broken part, because patching one component on a worn system just moves the failure six months down the line. The right fix, not the fast fix. Full details are on our Garage Door Repair in Commerce page.
Garage Door Opener Repair in Commerce
Commerce has a mix of older chain-drive openers and newer Wi-Fi-enabled units, and the failure patterns differ. Heat in an enclosed garage shortens the life of circuit boards and capacitors. Worn gears on 1990s-era Craftsman units, faulty safety sensors on mid-2000s Chamberlain openers, and myQ connectivity issues on newer LiftMaster systems are all familiar territory. We carry parts for eight major brands so we are not waiting on a distributor when a simple gear replacement will do it. See our Garage Door Opener Repair in Commerce page for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Commerce
Garage door installation in Commerce almost always starts with a measurement problem. The original doors on homes from the 1950s and 1960s were built to narrower, sometimes shorter specifications than what sits on a modern home improvement store shelf. We measure the actual opening, then order or build to those numbers so the new door closes tight and seals properly against the heat. On the industrial side, commercial roll-up installation means matching high-cycle hardware to buildings that never stop moving. See our Garage Door Installation overview for the full process.
Garage Door Replacement
Signs you need it
The door sags when half open, panels are dented or rusted through, or the door is original to a home built before 1975 and the spring system is on its second or third repair.
What it costs in Commerce
A full garage door replacement in Commerce runs $700 – $2,200 depending on size, material, insulation, and whether custom sizing is required for a narrow original opening.
How we do it
We measure the opening, verify spring compatibility with the new door’s weight, remove the old door and hardware, then install the new panels, tracks, springs, and weather seal in one visit.
Garage Door Installation Service
Signs you need it
A new home purchase with a missing or gutted garage door, a door damaged beyond panel repair, or an attached garage conversion that now needs a working door.
What it costs in Commerce
Simple single-door installations fall closer to $700, while oversized or custom-width installations on older Commerce lots run up toward $2,200.
How we do it
We confirm the rough opening and headroom, build a spring configuration matched to the door’s exact weight, set the track with proper slope, and test the full cycle before we leave.
Commercial Garage Door Installation
Signs you need it
A roll-up door that has been tagged out by maintenance, a warehouse expansion, or a loading bay door that no longer seals and spins the HVAC bill upward.
What it costs in Commerce
Commercial roll-up installations vary widely, but the door-and-hardware portion for a standard bay falls within the $700 – $2,200 new-door range before high-cycle hardware upgrades.
How we do it
We assess cycle requirements based on the building’s traffic, install the door and high-cycle springs matched to that duty level, and confirm the door balances properly at every position.
Garage Door Seal Installation
Signs you need it
Daylight visible under the closed door, dust and leaves blowing into the garage, or water pooling inside after a rare Commerce rain.
What it costs in Commerce
Bottom seal replacement runs $120 – $240 as a standalone job, with the price depending on the door’s width and whether channels need cleaning or repair first.
How we do it
We pull the old seal, clean the retaining channel or replace it if damaged, install a new vinyl or rubber seal sized to the door, and test the closed-door fit along the full width.
What Garage Door Installation Costs in Commerce
| Item | Typical range in Commerce |
|---|---|
| Full door replacement (single-car) | $700 – $1,500 |
| Full door replacement (double-car or custom width) | $1,500 – $2,200 |
| Weather seal installation | $120 – $240 |
Can you install a door into an old narrow Commerce garage opening?
Yes. We measure the exact opening before ordering anything. Older Commerce homes frequently have openings that are narrower than modern stock doors, so we order or adjust to those dimensions instead of trying to force a standard door into a non-standard frame.
Will the installation price change once you see the door opening?
No. We quote the price before any work begins, after measuring the opening and checking the spring and track condition. The number we give you is the number you pay, including hardware and labor. Call (855) 740-8388 for a free in-person quote.
Brands We Service in Commerce
We work on the brand already on your garage. That includes Amarr and Wayne Dalton for doors, plus Craftsman and Raynor openers and hardware. For full coverage across all eight manufacturers we support, see our brands page. Parts for common failures stay on the truck, so most Commerce repairs do not wait on a second visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Commerce, CA
| Service | Typical range in Commerce |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
Prices in Commerce get pushed upward when a 1950s opening needs custom sizing, when tracks and rollers have been on the door since the original install, or when a commercial roll-up requires high-cycle springs. They stay low when we catch a seal or a single roller early.
Whatever the number, it is quoted and agreed before any work starts. No surprise line items on the invoice.
Neighborhoods We Serve in Commerce
We cover all of Commerce and the surrounding area, including ZIP code 90101. Most repair calls get a same-week appointment, and spring or cable failures are treated as urgent because a door stuck open is a security problem, not just a nuisance.
- The residential streets between Eastern Avenue and the 5 Freeway
- The neighborhoods around Bandini Park
- The blocks near Rosewood Park and the Commerce Aquatics Center
- The industrial corridors along Washington Boulevard and Telegraph Road
- The housing near the Citadel Outlets
Service Area – Cities Near Commerce
We also serve homes and businesses in the neighboring communities of Maywood, CA, Bell, CA, Cudahy, CA, and Bell Gardens, CA. Same specialized team, same eight-brand coverage, no call-center handoffs.
Serving Commerce, CA — Our Local Coverage Area
We’re based in the Commerce area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Commerce
We handle broken spring and cable calls as urgent, and most Commerce jobs are scheduled within the same day or next business day. A snapped spring leaves the door dead weight and sometimes half-open, so we treat it as the priority it is. Call (855) 740-8388 and we will tell you the soonest available slot.
In most residential cases, matching an existing door size does not require a permit, but custom opening work or modifications to the frame can trigger the city’s planning review. We will tell you during the quote whether your specific Commerce job needs city approval before we start.
Yes. Commerce’s warehouse and distribution buildings are part of our regular territory, and our technicians work on both high-cycle roll-up doors and residential doors. Many of our Commerce commercial clients are on recurring maintenance, because a stuck loading bay door costs a business real money. Call (855) 740-8388 for commercial scheduling.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Rachel Hayes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Danielle Fletcher"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Jeff Novak